KAESER SIGMA CONTROL 2 User Manual

Fig. 26 User management menu
6. Enter a new user name in the User name: field.
7. Enter a new password in the Password: field.
8. Re-enter the same new password in the Repeat password: field.
9. Set Level 2 in the Access level: field.
10. Set the State: option in the Enabled field.
11. Click Add.
The new user name has been added to the user list.
Result A new user account has been created and activated.
Editing a user account
You can edit existing user accounts:
■ Changing the password
■ Changing the access level
■ Changing the status
Example: Change the password for an existing user account.
Precondition The User management menu is displayed.
Write mode is activated.
1. Click the required user account in the list.
2. Enter a new password in the Password: field.
3. Re-enter the same new password in the Repeat password: field.
4. Click Update user.
8 Initial Start-up
8.3 Using KAESER CONNECT
82
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2 No.: 9_9450 13 USE

KAESER SIGMA CONTROL 2 Specifications

General

Controller Type	Microprocessor-based
Model	SIGMA CONTROL 2
Manufacturer	KAESER
Input Voltage	24 V DC
Protection Class	IP54
Communication Protocols	Modbus, Profibus
Data Logging	Comprehensive data logging
Remote Monitoring	Yes
Communication Interface	Ethernet