KAESER SIGMA CONTROL 2 User Manual

Navigation Function / Submenu
8.2 Com-Module
3)
The content of the menu depends on the type of
the communication module identified.
The following KAESER communications mod‐
ules may be used:
■ PROFIBUS
■ Modbus
■ Modbus TCP
■ DeviceNet
■ PROFINET
■ EtherNet/IP
3)
SIGMA CONTROL 2 (Prepared for connection to control center)
4)
SIGMA CONTROL 2 FLUID
Tab. 37 Communication menu
5.6.2.4 Connections menu
Navigation Function / Submenu
8.1.2 Connections ■
SIGMA CONTROL 2
4)
─ Status
─ Mode
─ Port
─ Communication partner
─ IP address
─ Communication error
Start td
Timeout
■ SAM 4.0
─ Status
─ SAM 4.0 active:
Send/receive
Send
─ IP address
─ Port
─ Communication error
Start td
Timeout
Restart
Timeout
Cycle time
4)
SIGMA CONTROL 2 FLUID
Tab. 38 Connections menu
5 Design and Function
5.6 Menu overview
No.: 9_9450 13 USE
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2
43

KAESER SIGMA CONTROL 2 Specifications

General

Controller Type	Microprocessor-based
Model	SIGMA CONTROL 2
Manufacturer	KAESER
Input Voltage	24 V DC
Protection Class	IP54
Communication Protocols	Modbus, Profibus
Data Logging	Comprehensive data logging
Remote Monitoring	Yes
Communication Interface	Ethernet