11. Press «Enter».
12. Press «Escape» repeatedly to return to the main menu.
Result Access to the selected time server is active.
The internal clock of SIGMA CONTROL 2 is permanently synchronized.
8.3 Using KAESER CONNECT
Using an Internet-capable device with web browser, you can use KAESER CONNECT to remotely
display these SIGMA CONTROL 2 menus:
■ System status
■ Graphs
■ Messages
■ I/O display
■ User management
■ Settings
■ Backup
■ Data recording
Thus, KAESER CONNECT provides an excellent option for an easy and quick check of the econo‐
my and energy efficiency of your machines.
The following functions are not available with KAESER CONNECT:
■ Remotely starting the machine
■ Remotely setting parameters
For KAESER CONNECT to be able to use the Internet-capable device, it must be registered
in the same network as SIGMA CONTROL 2.
To be able to use KAESER CONNECT, the browser installed on the Internet-capable device
must be able to display HTML5 content. For security reasons, we strongly recommend to use
only up-to-date browser versions.
8.3.1 Open KAESER CONNECT
Precondition The user name (see chapter 8.2.3) and password (see chapter 8.2.5) are known.
The IP address of your controller is known, see chapters 8.2.14 and 8.10.4.
1. Use an Ethernet cable to connect SIGMA CONTROL 2 to the Internet-capable device or net‐
work.
2. In the web browser, enter the controller's IP address.
The Login window is displayed.
8 Initial Start-up
8.3 Using KAESER CONNECT
No.: 9_9450 13 USE
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2
73