KAESER SIGMA CONTROL 2 User Manual

3.1.4.1 Electrical connection specifications IOM
Power is provided by the machine's power supply unit.
Feature Value
Rated power supply (stabilized) [V DC] 24
Current consump‐
tion SIGMA CONTROL 2 with IOM 1 [A]
2.4
Current consumption IOM 2 [A] 2.5
Current consumption IOM 3 [A] 1.6
IOM ≙ Input/Output module
Tab. 19 Power supply specifications
3.1.4.2 Maximum cable lengths
Input/Output Cable length [ft]
Analog input current (AII),
Analog input resistor (AIR)
Analog output current (AOI)
＜ 100
Digital input (DI),
Digital output relay (DOR)
＜ 330
Digital output transistor (DOT) ＜ 100
Tab. 20 Maximum cable lengths
3.1.4.3 Input/output modules – degree of protection
Feature Value
Degree of protection within the machine IP 54
Degree of protection within the control cabinet IP 20
Tab. 21 Degree of protection, IOM
3.1.4.4 Input/output modules – dimensions
Feature Value
Width [in.] 4.9
Height [in.] 9.8
Depth [in.] 1.7
Tab. 22 IOM dimensions
3.1.5 Sensors
Pressure transducer
Feature Value
Output signal [mA] 0/4–20
3 Technical Data
3.1 Controller SIGMA CONTROL 2
No.: 9_9450 13 USE
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2
15

KAESER SIGMA CONTROL 2 Specifications

General

Controller Type	Microprocessor-based
Model	SIGMA CONTROL 2
Manufacturer	KAESER
Input Voltage	24 V DC
Protection Class	IP54
Communication Protocols	Modbus, Profibus
Data Logging	Comprehensive data logging
Remote Monitoring	Yes
Communication Interface	Ethernet