KAESER SIGMA CONTROL 2 - Displaying operating data; Set text for a maintenance counter

Line Submenu/Segment/Text
3 Text:
■ Message text
■ –
Tab. 82 Information of a message
Message type and status are shown abbreviated.
Segment Indication Meaning
Message number 0059 (example) Message 0059
Message type W Warning and maintenance message
A Alarm
Message status c Message has come
g Message gone
a Message acknowledged
Date 04/13/22 (Example) Date
Time 08:15:37AM (Example) Time
Tab. 83 Message abbreviations
9.4.1 Selecting the status menu
1. Select the 1.1 <Status – Messages > menu.
The Messages menu is displayed
The number of current alarms and warnings is displayed in the two bottom lines.
8 8 p s i 0 8 : 1 5 A M 1 7 6 ° F
Header
1.1 Messages
Menu
▶1 Current messages
Active line
▶2 Message history
▶3 Address error
Only displayed in the event of I/O parametrization
error
Status report 01:00 ☐
------------------------------
current Alarms 2
Number of currently registered faults
9 Operation
9.4 Displaying messages
178
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2 No.: 9_9450 13 USE