KAESER SIGMA CONTROL 2 User Manual

2 Regarding this Document
2.1 Using this document
The user manual contains important information to the entire life cycle of SIGMA CONTROL 2.
The user manual is a component of the product.
➤ Keep the user manual in a safe place throughout the life of SIGMA CONTROL 2.
➤ Pass the user manual on to the next owner/user of the machine.
➤ Ensure that all amendments received are inserted into the user manual.
2.2 Copyright
This user manual is protected by copyright. Any queries regarding the use or duplication of this
documentation should be referred to KAESER. Correct use of information will be fully supported.
2.2.1 Software
The software used in SIGMA CONTROL 2 contains copyright-protected software packages which
are licensed as Open Source.
A copy of these licenses is contained in SIGMA CONTROL 2.
Display the licenses by pointing your browser to the "COPYING" file in the root directory of
SIGMA CONTROL 2.
URL:
http:// <Hostname>/COPYING
The licenses can also be found under this address:
http://www.gnu.org/licenses
http://code.google.com/p/curve25519-donna/
Within three years from receipt of SIGMA CONTROL 2, you may obtain the complete source code
of the copyright-protected software packages by sending a corresponding order to the following ad‐
dress:
D&D Electrical Design
KAESER KOMPRESSOREN SE
96450 Coburg, Postfach 2143
Germany
This offer is valid for anyone in possession of this information.
2 Regarding this Document
2.1 Using this document
6
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2 No.: 9_9450 13 USE

KAESER SIGMA CONTROL 2 Specifications

General

Controller Type	Microprocessor-based
Model	SIGMA CONTROL 2
Manufacturer	KAESER
Input Voltage	24 V DC
Protection Class	IP54
Communication Protocols	Modbus, Profibus
Data Logging	Comprehensive data logging
Remote Monitoring	Yes
Communication Interface	Ethernet