KAESER SIGMA CONTROL 2 User Manual

Navigation Function / Submenu
1.4 Current operating mode Compressor on
Load control
Control mode
Idle period
12)
Idle warm-up
12)
Acknowledgement
Frequency converter
1) 4)
Heat recovery
HR valve (if available)
4)
Operating mode:
Nominal value
1.5 DI/DO status 1st I/O module
DI/DO display
2nd I/O module
DI/DO display
3rd I/O module
DI/DO display
1.6 pN/ADT curve Diagram:
Nominal pressure/airend discharge temperature
1.7 pN/n curve
1) 4)
Diagram:
Nominal pressure/Speed
1)
Power switching with frequency converter
2)
Only visible in the event of a parameterization error
3)
SIGMA CONTROL 2 (Prepared for connection to control center)
4)
SIGMA CONTROL 2 FLUID
12)
Not for AIRTOWER
Tab. 33 Status menu
5 Design and Function
5.6 Menu overview
No.: 9_9450 13 USE
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2
33

KAESER SIGMA CONTROL 2 Specifications

General

Controller Type	Microprocessor-based
Model	SIGMA CONTROL 2
Manufacturer	KAESER
Input Voltage	24 V DC
Protection Class	IP54
Communication Protocols	Modbus, Profibus
Data Logging	Comprehensive data logging
Remote Monitoring	Yes
Communication Interface	Ethernet