KAESER SIGMA CONTROL 2 - Configuring machine start and stop

Fig. 24 User management menu
1. Select the User management menu element.
2. Click read => write to activate the read/write mode.
The Log on for write access: window is displayed.
Fig. 25 Log on for write access: window
3. Enter your user name in the User name: field.
4. Enter your password in the Password: field.
5. Click OK.
The User management menu is displayed.
8 Initial Start-up
8.3 Using KAESER CONNECT
No.: 9_9450 13 USE
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2
81