2. Using the «Up» or «Down» keys, select the line
Operating mode:
.
The source for the speed setting will be displayed in the line
Operating mode:
.
8 8 p s i 0 8 : 1 5 A M 1 7 6 ° F
Header
10.1.1 Power switching
▶5 Softstart
▶6 Customer-provided
·········
Operating mode:
Pressure control
Source for speed setting
Nominal value:
3. Press the «Escape» key repeatedly to exit the menu.
9.10 Setting the maintenance interval
Maintenance comprises a set of tasks that must be completed in order to ensure the function‐
ality of a machine or system.
A maintenance interval is a period of time specified by the manufacturer, at the end of which
a maintenance task falls due.
Example: Changing the oil change maintenance interval.
Precondition Password access level 2 is activated
The operating display is shown
Unauthorized extended maintenance intervals
Progressive damage to the machine leading to inoperability
➤ Observe the maintenance intervals specified by the manufacturer
Maintenance menu
1. Open the 4
Maintenance
menu.
2. Using the «Up» or «Down» key, select the line
Oil change
.
3. Press the «Down» key three times.
The maintenance interval for oil change is displayed as the active line.
8 8 p s i 0 8 : 1 5 A M 1 7 6 ° F
Header
4 Maintenance
▶1 External counter
·········
Oil filter
Active line, maintenance interval description
3000h¦ 0150h Reset: ☐
Preset interval 3000h
·········
Oil separator
9 Operation
9.10 Setting the maintenance interval
No.: 9_9450 13 USE
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2
185
To Next Page
Loading...
