Fig. 11 Back of the RFID Equipment Card
1 Back of the RFID Equipment Card
2 Number of your RFID Equipment Card
1. Note the user name (= number of the RFID Equipment Card).
2. Keep the note at a secure location.
If your RFID Equipment Card gets damaged or can no longer be found?
➤ If you know your user name and password, you can manually log on to
SIGMA CONTROL 2 (see chapter 8.2.5).
8.2.4 User log-on with RFID Equipment Card
The RFID Equipment Card enables an easy and quick log-on at SIGMA CONTROL 2. It authorizes
you to access advanced functions of the controller.
Advanced access rights allow you to:
■ Read additional data
■ Change other settings
Fig. 12 User log-in with RFID Equipment Card
8 Initial Start-up
8.2 Setting the controller
No.: 9_9450 13 USE
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2
57
To Next Page
Loading...