KAESER SIGMA CONTROL 2 User Manual

Precondition Password access level 2 is activated.
1. Open the 5.1 <Configuration – General> menu.
2. Use «Up» or «Down» to select the Date format line.
8 8 p s i 0 8 : 1 5 A M 1 7 6 ° F
Header
5.1 General
Menu
US/Central
·········
▶2 Time server
·········
Date format MM/DD/YY
Date format
Time format hh:mm:ssAM/PM
3. Press «Enter».
The MM/DD/YY display flashes.
4. Use «Up» or «Down» to set the date format.
5. Press «Enter».
The setting is applied.
6. Press «Escape» repeatedly to return to the main menu.
Set the time format
Set the display for the time format:
Format Example
hh:mm:ss 13:33:45
hh:mm 13:33
hh:mm:ssAM/PM 01:33:45PM
hh:mmAM/PM 01:33PM
Tab. 46 Possible settings for the time format
Precondition Password access level 2 is activated.
1. Open the 5.1 <Configuration – General> menu.
2. Use «Up» or «Down» to select the Time format line.
8 8 p s i 0 8 : 1 5 A M 1 7 6 ° F
Header
5.1 General
Menu
US/Central
·········
▶2 Time server
·········
Date format MM/DD/YY
Time format hh:mm:ssAM/PM
Time format
3. Press «Enter».
The hh:mm:ssAM/PM indication flashes.
8 Initial Start-up
8.2 Setting the controller
64
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2 No.: 9_9450 13 USE

KAESER SIGMA CONTROL 2 Specifications

General

Controller Type	Microprocessor-based
Model	SIGMA CONTROL 2
Manufacturer	KAESER
Input Voltage	24 V DC
Protection Class	IP54
Communication Protocols	Modbus, Profibus
Data Logging	Comprehensive data logging
Remote Monitoring	Yes
Communication Interface	Ethernet