KAESER SIGMA CONTROL 2 - Closing KAESER CONNECT

Fig. 17 Select language: window
1 «Arrow key» Select language:
2 Select language: window
3 Select a language
4 Selected language
7. Select the required language 3 .
Result KAESER CONNECT is displayed in the selected language.
8.3.2 System status menu
Precondition KAESER CONNECT for SIGMA CONTROL 2 is displayed.
Fig. 18 System status menu
1. Click the System status menu element.
The System status menu is displayed.
8 Initial Start-up
8.3 Using KAESER CONNECT
No.: 9_9450 13 USE
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2
75