KAESER SIGMA CONTROL 2 User Manual

5.6.2.3 Communication menu
Navigation Function / Submenu
8.1 Ethernet/SIGMA NETWORK ■ IP configuration
─ IP address
─ Subnet mask
─ Gateway
─ DNS Server 1
─ DNS Server 2
─ Restart network
■ Connections
─
SIGMA CONTROL 2
4)
─ SAM 4.0
Restart
Timeout
Cycle time
For details of the Connections menu, please see
table 38.
■ E-mail
─ active:
Compressor number:
Language:
Repeat cut-off time:
Use SSL:
─ Sender address:
Sender name:
Contact telephone:
Receiver address:
─ SMTP Server:
User name:
Password:
─ Port/Timeout
Resend after:
─ Retry attempts:
MAC: MAC address
3)
SIGMA CONTROL 2 (Prepared for connection to control center)
4)
SIGMA CONTROL 2 FLUID
5 Design and Function
5.6 Menu overview
42
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2 No.: 9_9450 13 USE

KAESER SIGMA CONTROL 2 Specifications

General

Controller Type	Microprocessor-based
Model	SIGMA CONTROL 2
Manufacturer	KAESER
Input Voltage	24 V DC
Protection Class	IP54
Communication Protocols	Modbus, Profibus
Data Logging	Comprehensive data logging
Remote Monitoring	Yes
Communication Interface	Ethernet