KAESER SIGMA CONTROL 2 User Manual

5.6.2.6 Power switching menu
Navigation Function / Submenu
10.1.1 Power switching
USS status: Run/Error
1) 4)
■ Star-delta start
─ Temp. warm start
─ Star time T↑
─ Star time T↓
─ Υ/Δ switching time
─ Overload relay
─ Mains contactor
─ Star contactor
─ Delta contactor
■ DOL start
─ Run-up period:
─ Overload relay
─ Mains contactor
─ Delta contactor
■
High-voltage cell
4)
─ Run-up period:
─ ready
─ Mains contactor
■
SFC USS
4)
USS status: Run/Error
─
Run-up period:
1)
─
Service operation
1)
─
Heavy load monitoring
1)
─
Mains contactor
1)
─
STO channel A
1)
─
STO channel B
1)
■
Softstart
4)
─ ready
─ Motor running
─ Start-up ended
─ Start
─ Reset
─ Mains contactor
■
Customer-provided
4)
─ Temp. warm start
─ Run-up period T↑
─ Run-up period T↓
─ ready
─ Mains contactor/Alarm td
─ Redundancy contactor/Alarm td
1)
Power switching with frequency converter
4)
SIGMA CONTROL 2 FLUID
5 Design and Function
5.6 Menu overview
No.: 9_9450 13 USE
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2
45

KAESER SIGMA CONTROL 2 Specifications

General

Controller Type	Microprocessor-based
Model	SIGMA CONTROL 2
Manufacturer	KAESER
Input Voltage	24 V DC
Protection Class	IP54
Communication Protocols	Modbus, Profibus
Data Logging	Comprehensive data logging
Remote Monitoring	Yes
Communication Interface	Ethernet