KAESER SIGMA CONTROL 2 User Manual

3. Press the «DOWN» key.
8 8 p s i 0 8 : 1 5 A M 1 7 6 ° F
Header
5.1 General
Menu
·········
Model:
XXXXXX
Set machine type
·········
Date/time
04/13/22 08:15:37AM
Current date and time
4. Press the «Right» key.
5. Press «Enter».
The display for hours 00:00:00 flashes.
6. Use «Up» or «Down» to set the hours.
7. Press the «Right» arrow.
The display for minutes 00:00:00 flashes.
8. Use «Up» or «Down» to set the minutes.
9. Press the «Right» arrow.
The display for seconds 00:00:00 flashes.
10. Use «Up» or «Down» to set the seconds.
11. Press «Enter».
The setting is applied.
12. Press «Escape» repeatedly to return to the main menu.
Check and set date
Precondition Password access level 2 is activated.
1. Open the 5.1 <Configuration – General> menu.
2. Use «Up» or «Down» to select the Date/time line.
3. Press the «DOWN» key.
8 8 p s i 0 8 : 1 5 A M 1 7 6 ° F
Header
5.1 General
Menu
Model:
XXXXXX
Set machine type
·········
Date/time
04/13/22 08:15:37AM
Current date and time
US/Central
Time zone
4. Press «Enter».
The display for days 00.00.00 flashes.
5. Use «Up» or «Down» to set the day.
6. Press the «Right» arrow.
The display for months 00.00.00 flashes.
8 Initial Start-up
8.2 Setting the controller
62
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2 No.: 9_9450 13 USE

KAESER SIGMA CONTROL 2 Specifications

General

Controller Type	Microprocessor-based
Model	SIGMA CONTROL 2
Manufacturer	KAESER
Input Voltage	24 V DC
Protection Class	IP54
Communication Protocols	Modbus, Profibus
Data Logging	Comprehensive data logging
Remote Monitoring	Yes
Communication Interface	Ethernet