Keysight E4980A - Scanner Interface

Keysight E4980A/AL Precision LCR Meter 153
System Configurations
SYSTEM INFO Page
Scanner Interface
Functional Description
When equipped with Option 301 Scanner Interface, the E4980A/AL supports
multi-channel correction. The 14-contact Amphenol connector on the rear
panel is used to connect the interface, through which control output signals
and multi-channel correction channel selector signals are communicated.
For more information on available options, see Appendix F , “Scanner
Interface,” on page 483.
Monitor Information
The SYSTEM INFO page displays the following monitor information. None of
this information can be edited on the SYSTEM INFO page.
When the E4980A/AL is not equipped with the Scanner Interface, the
SCANNER I/F field shows a “NOT INSTALLED” message and the ON/OFF
settings are not available.
Softkey Description
ON Turns ON the scanner interface feature.
OFF Turns OFF the scanner interface feature.
Monitor
Information
Description
MODEL No. Displays the model number, i.e. E4980A/AL.
SER No. Displays the serial number of the instrument.
FW VER Displays the version of the firmware installed in the instrument.
FW DATE Displays the date of the instrument’s most recent update.
OPTION Displays the option number of any option installed in the instrument.
MAC ADDR Displays the MAC address.
USB ID Displays the USB address.