Keysight E4980A - Control:scanner:state; Correction:length

Keysight E4980A/AL Precision LCR Meter 331
SCPI Command Reference
E4980A/AL commands
Parameter
Equivalent key [System] - SYSTEM INFO - HANDLER I/F - ON
[System] - SYSTEM INFO - HANDLER I/F - OFF
:CONTrol:SCANner:STATe
Syntax :CONTrol:SCANner:STATe {ON|OFF|1|0}
:CONTrol:SCANner:STATe?
Description Enables the scanner I/F.
Parameter
Equivalent key [System] - SYSTEM INFO - SCANNER I/F - ON
[System] - SYSTEM INFO - SCANNER I/F - OFF
:CORRection:LENGth
Syntax :CORRection:LENGth <numeric>
:CORRection:LENGth?
Description Selects the cable length correction setting.
Parameter
Equivalent key [Meas Setup] - CORRECTION - CABLE - 0 m
Description
ON or 1 Enables the handler I/F
OFF or 0 (Preset value) Disables the handler I/F
Description
ON or 1 Enables the scanner I/F
OFF or 0(Preset value) Disables the scanner I/F
<Numeric>
Range 0|1|2|4
Preset value 0
Unit m