Keysight E4980A - Function:smonitor:IDC[:State]; Function:smonitor:vac[:State]

350 Keysight E4980A/AL Precision LCR Meter
SCPI Command Reference
E4980A/AL commands
10-
Parameter
Equivalent key No equivalent key is available on the front panel.
:FUNCtion:SMONitor:IDC[:STATe]
Syntax :FUNCtion:SMONitor:IDC[:STATe] {ON|OFF|1|0}
:FUNCtion:SMONitor:IDC[:STATe]?
Description Enables the DC current-level monitor function.
Parameter
Equivalent key [Meas Setup] - MEAS SETUP - IDC MON - ON
[Meas Setup] - MEAS SETUP - IDC MON - OFF
:FUNCtion:SMONitor:VAC[:STATe]
Syntax :FUNCtion:SMONitor:VAC[:STATe] {ON|OFF|1|0}
:FUNCtion:SMONitor:VAC[:STATe]?
Description Does nothing. The E4980A/AL always has its AC voltage-level monitor turned
ON. This function is provided because of its command compatibility with
4284A.
Parameter
Description
ON or 1 (Preset value) Does nothing
OFF or 0 Does nothing
This is available when option 001 is installed.
Description
ON or 1 DC current monitor function ON
OFF or 0 (Preset value) DC current monitor function OFF
Description
ON or 1 (Preset value) Does nothing