Keysight E4980A - USB Memory Notes

Keysight E4980A/AL Precision LCR Meter 169
Save/Recall
Overview of Save/Recall Functionality
Figure 6-1 Folder/File Structure on USB Memory
USB Memory Notes
Attention should be given to the following points when using a USB memory
device with the E4980A/AL
• Use a USB memory whose interface is USB 1.1.
• Use a USB memory that is USB mass storage class compliant and
formatted with FAT16 or FAT32.
• Use the USB memory solely for the E4980A/AL. Otherwise, other data
previously saved in the USB memory could be erased.
• If you cannot save into or recall from the USB memory, use another USB
memory device.
• Keysight Technologies shall not be responsible for nor assume any liability
for data loss in your USB memory device after using it with the E4980A/AL.
㪼㪋㪐㪏㪇㪸㫌㫁㪈㪈㪋㪏
\㪼㪋㪐㪏㪇㪸
\㪻㪸㫋㪸
\㫀㫄㪸㪾㪼
㪜㪋㪐㪏㫏㪇㪇㪈㪅㪺㫊㫍
㪜㪋㪐㪏㫏㪇㪇㪉㪅㪺㫊㫍
㪜㪋㪐㪏㫏㪐㪐㪐㪅㪺㫊㫍
㪜㪋㪐㪏㫏㪇㪇㪈㪅㪾㫀㪽
㪜㪋㪐㪏㫏㪇㪇㪉㪅㪾㫀㪽
㪜㪋㪐㪏㫏㪐㪐㪐㪅㪾㫀㪽
\㫊㫋㪸㫋㪼
㪈㪇㪅㫊㫋㪸
㪈㪈㪅㫊㫋㪸
㪈㪐㪅㫊㫋㪸