Keysight E4980A - System:beeper[:Immediate]; System:beeper:state; System:beeper:tone

Keysight E4980A/AL Precision LCR Meter 365
SCPI Command Reference
E4980A/AL commands
:SYSTem:BEEPer[:IMMediate]
Syntax :SYSTem:BEEPer[:IMMediate]
Description Produces a beep sound. Even if the beep sound is disabled by the
:SYSTem:BEEPer:STATe command, a beep sound is still produced. (No Query)
Equivalent key No equivalent key is available on the front panel.
:SYSTem:BEEPer:STATe
Syntax :SYSTem:BEEPer:STATe {ON|OFF|1|0}
:SYSTem:BEEPer:STATe?
Description Enables a beep sound.
Parameter
Equivalent key [System] - SYSTEM CONFIG - BEEPER ENABLED - ON
[System] - SYSTEM CONFIG - BEEPER ENABLED - OFF
:SYSTem:BEEPer:TONE
Syntax :SYSTem:BEEPer:TONE <numeric>
:SYSTem:BEEPer:TONE?
Description Selects a beep sound tone.
Parameter
Equivalent key [System] - SYSTEM CONFIG - BEEPER TONE - TONE 1
[System] - SYSTEM CONFIG - BEEPER TONE - TONE 2
Description
ON or 1 Enables a beep sound
OFF or 0 (Preset value) Disables a beep sound
<Numeric>
Range 1 to 5
Preset value 3
Resolution 1