Keysight E4980A - Command list

376 Keysight E4980A/AL Precision LCR Meter
SCPI Command Reference
Command list
10-
Command list
List by function
SCPI command list according to function
Function Setting/execution item Command
Abort Abort trigger :ABORt
Amplitude ALC On/Off :AMPLitude:ALC
Aperture Integ time and averaging setup :APERture
Comparator Auxiliary BIN counting function
On/Off
:COMParator:ABIN
Beep Condition Selection :COMParator:BEEPer
Bin Limit value setting clear :COMParator:BIN:CLEar
BIN counts clear :COMParator:BIN:COUNt:CLEar
BIN count results readout :COMParator:BIN:COUNt:DATA
BIN count function On/Off :COMParator:BIN:COUNt[:STATe]
Limit mode setup :COMParator:MODE
Bin limit values setup for the
sequential mode
:COMParator:SEQuence:BIN
BIN Limit values setup for the
secondary parameter
:COMParator:SLIMit
Comparator function On/Off :COMParator[:STATe]
Swap parameter function On/Off :COMParator:SWAP
BIN limit values setup for the
tolerance mode
:COMParator:TOLerance:BIN[1-9]
Nominal value setup for the
tolerance mode
:COMParator:TOLerance:NOMinal
Control Handler I/F enable :CONTrol:HANDler:STATe
Scanner I/F enable :CONTrol:SCANner:STATe