Keysight E4980A - Changing the Beep Tone; Configuring the System Date

Keysight E4980A/AL Precision LCR Meter 157
System Configurations
SYSTEM CONFIG Page
Changing the Beep Tone
Functional Description
The E4980A/AL allows you to change the beep tone to one of five levels.
To change the beep tone:
Step 1. Press [System].
Step 2. Press the SYSTEM CONFIG softkey.
Step 3. Use the cursor keys to select the BEEPER TONE field.
Step 4. Change the beep tone by pressing the appropriate softkey:
Configuring the System Date
Functional Description
The E4980A/AL features a built-in clock.
To configure the system date:
Step 1. Press [System].
Step 2. Press the SYSTEM CONFIG softkey.
Step 3. Use the cursor keys to select the DATE/TIME field.
Step 4. Use the following softkeys:
Softkey Description
TONE 1 Selects tone 1.
TONE 2 Selects tone 2.
TONE 3 Selects tone 3.
TONE 4 Selects tone 4.
TONE 5 Selects tone 5.
Softkey Description
DATE Selects the date field so that you can change the year, month, and
day.
TIME Selects the time field so that you can change the hour, minute, and
second digits.