Keysight E4980A - Correction:load:state; Correction:load:type

332 Keysight E4980A/AL Precision LCR Meter
SCPI Command Reference
E4980A/AL commands
10-
[Meas Setup] - CORRECTION - CABLE - 1 m
[Meas Setup] - CORRECTION - CABLE - 2 m
[Meas Setup] - CORRECTION - CABLE - 4 m
:CORRection:LOAD:STATe
Syntax :CORRection:LOAD:STATe {ON|OFF|1|0}
:CORRection:LOAD:STATe?
Description Enables LOAD correction.
Parameter
Equivalent key [Meas Setup] - CORRECTION - LOAD - ON
[Meas Setup] - CORRECTION - LOAD - OFF
:CORRection:LOAD:TYPE
Syntax :CORRection:LOAD:TYPE
{CPD|CPQ|CPG|CPRP|CSD|CSQ|CSRS|LPD|LPQ|LPG|LPRP|LSD|LSQ|LSRS|RX|Z
TD|ZTR|GB|YTD|YTR}
:CORRection:LOAD:TYPE?
Description Selects the measurement function of the reference values for load correction.
Parameter
Description
ON or 1 Enables LOAD correction
OFF or 0 (Preset value) Disables LOAD correction
Description
CPD (Preset value) Sets the type of LOAD correction reference to “Cp-D”
CPQ Sets the type of LOAD correction reference to “Cp-Q”
CPG Sets the type of LOAD correction reference to “Cp-G”
CPRP Sets the type of LOAD correction reference to “Cp-Rp”
CSD Sets the type of LOAD correction reference to “Cs-D”
CSQ Sets the type of LOAD correction reference to “Cs-Q”
CSRS Sets the type of LOAD correction reference to “Cs-Rs”