Keysight E4980A User Manual

170 Keysight E4980A/AL Precision LCR Meter
Save/Recall
Saving/Recalling Instrument Configuration States
6-
Saving/Recalling Instrument Configuration States
Overview of Instrument Configurations
Pressing the [Save/Recall] opens the CATALOG page. You can save/recall
instrument configuration states in either of two ways:
• Save into the internal memory
•Save into USB memory
You can save up to 10 registers into the internal memory and into a single USB
memory device. Also, register numbers have extensions as shown in Table 6-2:
In this page, you can configure each of the following controls with the cursor
placed in the corresponding field (denoted in parentheses).
• Medium mode (MEDIA field)
• Register number (No. field)
Table 6-2 Extensions for register numbers
Classification Register number
(No. field)
Extension
Internal
memory
0 Recalled when the [Recall A] key is pressed.
1 Recalled when the [Recall B] key is pressed.
2 through 9 -
USB memory 10 Auto recall
11 through 19 -

Keysight E4980A Specifications

General

Frequency Range	20 Hz to 2 MHz
Basic Accuracy	0.05%
DC Bias Voltage	0 V to ±40 V
Measurement Functions	L, C, R, Z, D, Q
DC Bias Current	0 A to 20 mA (using external DC bias source)
Display	LCD
Interface	LAN, USB, GPIB
Dimensions	426 mm (W) x 177 mm (H)
Weight	13.5 kg