Keysight E4980A - System:communicate:gpib[:Self]:Address; System:communicate:lan[:Self]:Address; System:communicate:lan[:Self]:Aip[:State]

366 Keysight E4980A/AL Precision LCR Meter
SCPI Command Reference
E4980A/AL commands
10-
[System] - SYSTEM CONFIG - BEEPER TONE - TONE 3
[System] - SYSTEM CONFIG - BEEPER TONE - TONE 4
[System] - SYSTEM CONFIG - BEEPER TONE - TONE 5
:SYSTem:COMMunicate:GPIB[:SELF]:ADDRess
Syntax :SYSTem:COMMunicate:GPIB[:SELF]:ADDRess <numeric>
:SYSTem:COMMunicate:GPIB[:SELF]:ADDRess?
Description Sets the GPIB address.
Parameter
Equivalent key [System] - SYSTEM CONFIG - GPIB ADDR
:SYSTem:COMMunicate:LAN[:SELF]:ADDRess
Syntax :SYSTem:COMMunicate:LAN[:SELF]:ADDRess <String>
:SYSTem:COMMunicate:LAN[:SELF]:ADDRess?
Description Sets the static IP address.
Parameter
Equivalent key [System] - SYSTEM CONFIG - MANUAL IP ADDR - ENTER
:SYSTem:COMMunicate:LAN[:SELF]:AIP[:STATe]
Syntax :SYSTem:COMMunicate:LAN[:SELF]:AIP[:STATe] {ON|OFF|1|0}
:SYSTem:COMMunicate:LAN[:SELF]:AIP[:STATe]?
<Numeric>
Range 0 to 30
Preset value 17
Resolution 1
<String>
Preset value "192.168.1.101"