Keysight E4980A - System:communicate:lan[:Self]:Current:address; System:communicate:lan[:Self]:Current:dgateway; System:communicate:lan[:Self]:Current:smask; System:communicate:lan[:Self]:Dgateway

368 Keysight E4980A/AL Precision LCR Meter
SCPI Command Reference
E4980A/AL commands
10-
Equivalent key No equivalent key is available on the front panel.
:SYSTem:COMMunicate:LAN[:SELF]:CURRent:ADDRess?
Syntax :SYSTem:COMMunicate:LAN[:SELF]:CURRent:ADDRess?
Description Returns the current IP address. (Query Only)
Equivalent key No equivalent key is available on the front panel.
:SYSTem:COMMunicate:LAN[:SELF]:CURRent:DGATeway?
Syntax :SYSTem:COMMunicate:LAN[:SELF]:CURRent:DGATeway?
Description Returns the current Gateway address. (Query Only)
Equivalent key No equivalent key is available on the front panel.
:SYSTem:COMMunicate:LAN[:SELF]:CURRent:SMASk?
Syntax :SYSTem:COMMunicate:LAN[:SELF]:CURRent:SMASk?
Description Returns the current Subnet Mask. (Query Only)
Equivalent key No equivalent key is available on the front panel.
:SYSTem:COMMunicate:LAN[:SELF]:DGATeway
Syntax :SYSTem:COMMunicate:LAN[:SELF]:DGATeway <String>
:SYSTem:COMMunicate:LAN[:SELF]:DGATeway?
Description Sets the static Gateway address.
Parameter
Equivalent key [System] - SYSTEM CONFIG - MANUAL GATEWAY - ENTER
:SYSTem:COMMunicate:LAN[:SELF]:DHCP[:STATe]
Syntax :SYSTem:COMMunicate:LAN[:SELF]:DHCP[:STATe] {ON|OFF|1|0}
:SYSTem:COMMunicate:LAN[:SELF]:DHCP[:STATe]?
<String>
Preset value "0.0.0.0"