Keysight E4980A - Page 378

378 Keysight E4980A/AL Precision LCR Meter
SCPI Command Reference
Command list
10-
DC bias DC bias current setup :BIAS:CURRent[:LEVel]
Automatic Polarity Control On/Off :BIAS:POLarity:AUTO
Actual applied bias current output
level readout
:BIAS:POLarity:CURRent[:LEVel]
Actual applied bias voltage output
level readout
:BIAS:POLarity:VOLTage[:LEVel]
DC Bias On/Off :BIAS:STATe
DC bias voltage setup :BIAS:VOLTage[:LEVel]
DC Output DCI auto range enable :OUTPut:DC:ISOLation:LEVel:AUTO
DC isolation range selection :OUTPut:DC:ISOLation:LEVel:VALue
DC Isolation Enable :OUTPut:DC:ISOLation[:STATe]
Dummy command (for 4284A
compatibility)
:OUTPut:HPOWer
DC Source DC Source enable :SOURce:DCSource:STATe
DC source voltage setup :SOURce:DCSource:VOLTage[:LEVel]
Display Error or caution messages on display
clear
:DISPlay:CCLear
Display update enable :DISPlay:ENABle
Comment line entry :DISPlay:LINE
Displayed page selection :DISPlay:PAGE
Most siginificant digit selection :DISPlay[:WINDow]:TEXT[1-2][:DATA]:FMSD:DATA
Fixed decimal point mode enable :DISPlay[:WINDow]:TEXT[1-2][:DATA]:FMSD[:STATe]
Fetch Complex measurement result
readout
:FETCh[:IMPedance]:CORRected
Measurement result return with the
selected measurement function
:FETCh[:IMPedance][:FORMatted]
AC current monitor data readout :FETCh:SMONitor:IAC
DC current monitor data readout :FETCh:SMONitor:IDC
AC voltage monitor data readout :FETCh:SMONitor:VAC
DC voltage monitor data readout :FETCh:SMONitor:VDC
Function Setting/execution item Command