Keysight E4980A - Page 395

Keysight E4980A/AL Precision LCR Meter 395
SCPI Command Reference
Command list
MEAS TIME
LONG Sets the integration time and the averaging rate :APER LONG
MED Sets the integration time and the averaging rate :APER MED
SHORT Sets the integration time and the averaging rate :APER SHOR
RANGE Selects impedance measurement range :FUNC:IMP:RANG:VAL
AUTO Enables the auto range function for the impedance
measurement
:FUNC:IMP:RANG:AUTO
ON
HOLD Enables the auto range function for the impedance
measurement
:FUNC:IMP:RANG:AUTO
OFF
[Local/Lock] Enables the front panel key lock :SYST:KLOC
[Meas Setup]
CORRECTION
CABLE
0 m Selects the cable length correction setting :CORR:LENG 0
1 m Selects the cable length correction setting :CORR:LENG 1
2 m Selects the cable length correction setting :CORR:LENG 2
4 m Selects the cable length correction setting :CORR:LENG 4
CH Selects the channel number to be used for MULTI mode :CORR:USE:CHAN
FREQ Sets the frequency for the specified measurement point CORR:SPOT[1-201]:FREQ
MEAS
LOAD
Executes the LOAD correction at the specified
measurement point
:CORR:SPOT[1-201]:LOAD:
EXEC
MEAS
OPEN
Executes the OPEN correction at the specified
measurement point
:CORR:SPOT[1-201]:OPEN
:EXEC
MEAS
SHORT
Executes the SHORT correction at the specified
measurement point
:CORR:SPOT[1-201]:SHOR
:EXEC
OFF Enables the specified measurement point :CORR:SPOT[1-201]:STAT
OFF
ON Enables the specified measurement point :CORR:SPOT[1-201]:STAT
ON
FUNC
Cp- ...
Key Operation Function SCPI Command