Keysight E4980A - Page 398

398 Keysight E4980A/AL Precision LCR Meter
SCPI Command Reference
Command list
10-
MEAS
OPEN
Executes the OPEN correction CORR:OPEN:EXEC
ABORT Resets the trigger system, putting the trigger state in the
IDLE STATE on the state diagram
:ABOR
OFF Turns OFF the OPEN correction CORR:OPEN:STAT OFF
ON Turns ON the OPEN correction CORR:OPEN:STAT ON
OPEN A Executes the OPEN correction at the specified
measurement point
:CORR:SPOT[1-201]:OPEN
:SEL
OPEN B Executes the OPEN correction at the specified
measurement point
:CORR:SPOT[1-201]:OPEN
:SEL
REF A Sets the reference values of the standard at the specified
measurement point
:CORR:SPOT[1-201]:LOAD:
STAN
REF B Sets the reference values of the standard at the specified
measurement point
:CORR:SPOT[1-201]:LOAD:
STAN
SHORT
MEAS
SHORT
ABORT Resets the trigger system, putting the trigger state in the
IDLE STATE on the state diagram
:ABOR
OFF Turns OFF the SHORT correction CORR:SHOR:STAT OFF
ON Turns ON the SHORT correction CORR:SHOR:STAT ON
SHORT A Executes the SHORT correction at the specified
measurement point
:CORR:SPOT[1-201]:SHOR
:SEL
SHORT B Executes the SHORT corection at the specified
measurement point
:CORR:SPOT[1-201]:SHOR
:SEL
SPOT No. Selects the cable length correction setting
LIMIT TABLE
AUX
OFF Turns OFF the auxiliary BIN counting function :COMP:ABIN OFF
ON Turns ON the auxiliary BIN counting function :COMP:ABIN ON
BEEP
FAIL Selects the condition for generating a beep sound :COMP:BEEP FAIL
PASS Selects the condition for generating a beep sound :COMP:BEEP PASS
Key Operation Function SCPI Command