2N8/2N7-2
1-2-117
i-FAX
Settings
SMTP SMTP Port Number Set the port number used by SMTP. Normally, 25 is used.
SMTP Server Timeout Enter the timeout period in seconds.
Authentication Protocol Specify whether SMTP authentication will be used or
whether [POP before SMTP] will be used. This SMTP
authentication is compatible with Microsoft Exchange
2000.
SMTP POP before
SMTP Timeout
If you selected [POP before SMTP] in the authentication
setting, specify the timeout period in seconds.
Connection Test Tests to confirm that the settings on this page are correct.
When the [Test] button is pressed, this machine tries to
connect to the SMTP server.
Domain Restriction Activate or deactivate to restrict domains. Press the
[Domain List] button to configure. Enter a domain name
that is permitted or rejected. You can also specify the
Email addresses.
POP3 Check Interval Displays the interval, in minutes, for connecting to the
POP3 server to check for incoming e-mails at specific
interval. Specify the interval in the range from 3 minutes
to 60 minutes. The default is 15 minutes.
Run once now Click [Receive] to immediately connect to the POP3
server and check for incoming E-mail.
Domain Restriction Activate or deactivate to restrict domains. Press the
[Domain List] button to configure. Enter a domain name
that is permitted or rejected. You can also specify the
Email addresses.
POP3 User Settings ―
E-mail Address
*1
Enter the i-FAX address (E-mail address). You can enter
up to 64 characters.
POP3 Server
Name
*1
If you enter the server name, you must specify the IP
address of the DNS server. You can enter the DNS server
IP address in the TCP/IP settings screen. Refer to the
machine’s Operation Guide for details.
POP3 Port
Number
Sets the port number used by POP3. Normally, 110 is
used.
POP3 Server
Timeout
Enter the timeout period in seconds.
Login User
Name
*1
Enter the login name for the user account. You can enter
up to 64 characters.
Login Password
*1
Enter the password for the user account. You can enter
up to 64 characters.
Use APOP Specify whether to use APOP authentication. To use
APOP authentication, select [On] in this setting.
Item Description
To Next Page
Loading...
