Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 113
Support Files
You can download a support file from a sensor and save it on your computer. You can then use the
support file to create a scenario in the Gocator emulator (for more information on the emulator, see
Gocator Emulator on page 457). LMI's support staff may also request a support file to help in
troubleshooting.
To download a support file:
1. Go to the Manage page and click on the Support category.
2. In Filename, type the name you want to use for the support file.
When you create a scenario from a support file in the emulator, the filename you provide here is displayed
in the emulator's scenario list.
Support files end with the .gs extension, but you do not need to type the extension in Filename.
3. (Optional) In Description, type a description of the support file.
When you create a scenario from a support file in the emulator, the description is displayed below the
emulator's scenario list.
4. Click Download, and then when prompted, click Save.
Downloading a support file stops the sensor.
Manual Access
You can access the Gocator manuals from within the Web interface.
You may need to configure your browser to allow pop-ups to open or download the manual.
To access the manuals:
1. Go to the Manage page and click on the Support category
2. Next to UserManual, click one of the following:
To Next Page
Loading...
Need help?
General
