LMI Technologies Gocator 2500 Series User Manual

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 491
Element Type Description
@used Bool Whether this field is used
Enabled Bool Whether to allow using separate exposure values for each
camera
FrontCameraExposure 64f The exposure value to use for the front camera
FrontCameraExposure.min 64f The minimum exposure value possible for front camera
FrontCameraExposure.max 64f The maximum exposure value possible for back camera
BackCameraExposure 64f The exposure value to use for the front camera
BackCameraExposure.min 64f The minimum exposure value possible for front camera
BackCameraExposure.max 64f The maximum exposure value possible for back camera
IndependentExposures Child Elements
Tracheid settings are only supported by Gocator 200 series multi-point sensors.
Element Type Description
@used Bool Whether this field is used
TracheidExposureEnabled Bool Whether to use a unique exposure for tracheid capture
TracheidExposure 64f The exposure value to use for tracheid measurements
TracheidExposure.min 64f The minimum exposure value possible tracheid measurements
TracheidExposure.max 64f The maximum exposure value possible for tracheid
measurements
Camera0Threshold 32u The tracheid threshold for camera 0
Camera1Threshold 32u The tracheid threshold for camera 1
Tracheid Child Elements
SurfaceGeneration
The SurfaceGeneration element contains settings related to surface generation.
Element Type Description
Type 32s
Surface generation type:
0 – Continuous
1 – Fixed length
2 – Variable length
3 – Rotational
Type.options 32s (CSV) List of available generation types
Type.value 32s Value in use by the sensor
FixedLength Section
See FixedLength on the next page.
VariableLength Section
See VariableLength on the next page.
Rotational Section
See Rotational on the next page.
SurfaceGeneration Child Elements

LMI Technologies Gocator 2500 Series Specifications

General

Brand	LMI Technologies
Model	Gocator 2500 Series
Category	Accessories
Language	English