LMI Technologies Gocator 2500 Series User Manual

Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 364
Measurements, Features, and Settings
Measurement Illustration
Center X
Determines the X position of the center of the sphere.
Center Y
Determines the Y position of the center of the sphere.
Center Z
Determines the Z position of the center of the sphere.
Radius
Determines the radius of the sphere.
StandardDeviation
Determines the error of the points compared to the
computed sphere. It is defined as the square root of the
variance of the distance of every point to the computed
sphere.
Measurements
Type Description
Center
The center of the circle encompassing the widest part of the
fitted sphere.
Circle
The circle encompassing the widest part of the fitted
sphere.
Features
For more information on geometric features, see Geometric Features on page 206.
Parameter Description
Source The sensor, or combination of sensors, that provides data for the tool's measurements.
For more information, see Source on page 201.
Parameters

LMI Technologies Gocator 2500 Series Specifications

General

Brand	LMI Technologies
Model	Gocator 2500 Series
Category	Accessories
Language	English