Gocator Line Profile Sensors: User Manual
Protocols • 594
Field Type Offset Description
length 32u 0 Reply size including this field, in bytes.
id 16u 4 Reply identifier (0x4539).
Voltage 16u 10 0: 48 Volts; 1: 24 Volts.
Cable Length 32u 12 0 – 100: Meters
Reply
Set Voltage Settings
The Set Voltage Settings command sets the sensor’s voltage and cable length settings.
Field Type Offset Description
length 32u 0 Command size including this field, in bytes.
id 16u 4 Command identifier (0x4538).
Voltage 16u 6 0: 48 Volts; 1: 24 Volts.
Cable Length 32u 8 0 – 100: Meters
Command
Field Type Offset Description
length 32u 0 Reply size including this field, in bytes.
id 16u 4 Reply identifier (0x4538).
status 32s 6
Reply status. For a list of status codes, see Commands on page
571.
Reply
Get Quick Edit Enabled
The Get Quick Edit Enabled command returns whether Quick Edit mode is enabled on the sensor.
Field Type Offset Description
length 32u 0 Command size including this field, in bytes.
id 16u 4 Command identifier (0x4541).
Command
Field Type Offset Description
length 32u 0 Reply size including this field, in bytes.
id 16u 4 Reply identifier (0x4541).
status 32s 6
Reply status. For a list of status codes, see Commands on page
571.
Enable 8u 10 0: disabled; 1: enabled.
Reply
Set Quick Edit Enabled
The Set Quick Edit Enabled command enables or disables Quick Edit mode on the sensor.
To Next Page
Loading...
Need help?
General
