Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 163
Video Mode
In Video mode, the data viewer displays images directly from the sensor's camera or cameras. In a dual-
or multi-sensor system, camera images from any camera can be displayed.
In this mode, you can configure the data viewer to display exposure, spot, and dropout information that
can be useful in properly setting up the system for scanning.
Exposure Information
In Video mode, you can display exposure-related information. This information can help you correctly
adjust the exposure settings.
Exposures
If you have set Exposure Mode to Multiple, and have set more than one exposure, a drop-down at the
top of the data viewer lists the available exposures. Choosing an exposure changes the view of the data
viewer to that exposure.
To Next Page
Loading...
Need help?
General
