LMI Technologies Gocator 2500 Series User Manual

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 483
Element Type Description
X 64f X start(mm).
Y 64f Y start (mm).
Z 64f Z start (mm).
Width 64f X extent (mm).
Length 64f Y extent (mm).
Height 64f Z extent (mm).
ZAngle 64f Z Angle start (degrees).
ZAngle.used Bool Whether or not this property is used.
Region3D Child Elements
Element Type Description
ColumnCount 32u Column count.
ColumnCount.value 32u Column count value.
Grid Elements
Alignment
The Alignment element contains settings related to alignment and encoder calibration.
Element Type Description
@used Bool Whether or not this field is used
InputTriggerEnabled Bool Enables digital input-triggered alignment operation.
InputTriggerEnabled.used Bool Whether or not this feature can be enabled. This feature is available only
on some sensor models.
InputTriggerEnabled.value Bool Actual feature status.
Type 32s
Type of alignment operation:
0 – Stationary
1 – Moving
Type.options 32s (CSV) List of available alignment types.
StationaryTarget 32s
Stationary alignment target:
0 – None
1 – Disk
2 – Bar
3 – Plate
StationaryTarget.options 32s (CSV) List of available stationary alignment targets.
MovingTarget 32s
Moving alignment target:
1 – Disk
2 – Bar
MovingTarget.options 32s (CSV) List of available moving alignment targets.
Alignment Child Elements

LMI Technologies Gocator 2500 Series Specifications

General

Brand	LMI Technologies
Model	Gocator 2500 Series
Category	Accessories
Language	English