LMI Technologies Gocator 2500 Series User Manual

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 504
Element Type Description
Type 32s Setting to determine how the feature is detected within the area:
0 – Average (formerly Centroid 2d)
1 – Centroid (formerly Centroid 3d)
2 – X Max
3 – X Min
4 – Y Max
5 – Y Min
6 – Z Max
7 – Z Min
8 – Median
RegionEnabled Boolean Setting to enable/disable region:
0 – Disable
1 – Enable
Region
Region3D
Element for feature detection volume.
SurfaceFeature Child Elements
SurfaceRegion2d
An element of type SurfaceRegion2d defines a rectangular area of interest on the X-Y plane.
Element Type Description
X 64f Setting for surface region X position (mm).
Y 64f Setting for surface region Y position (mm).
Width 64f Setting for region width (mm).
Length 64f Setting for region length (mm).
SurfaceRegion2d Child Elements
Geometric Feature Types
The Geometric Feature type is used by various measurement tools.
Element Type Description
@id 32s The identifier of the geometric feature. -1 if unassigned.
@dataType String
The data type of the feature. One of:
– PointFeature
– LineFeature
@type String Type name of feature.
Name String The display name of the feature.
Enabled Bool Whether the given feature output is enabled.
Parameters Collection Collection of GdkParam elements.
Feature Child Elements
Parameter Types
The following types are used by internal and custom (user-created) GDK-based tools.

LMI Technologies Gocator 2500 Series Specifications

General

Brand	LMI Technologies
Model	Gocator 2500 Series
Category	Accessories
Language	English