LS Industrial Systems XG5000 - Import Item from File

Chapter 3 Project
3-24
3.4.2 Import item from file
The following items can be saved as separate item files and replaced by saved item file.
Item File extension
PLC cfg
Global/direct variables gdv
I/O parameter iop
Basic parameter bsp
Program prg
User function/function block fun
Imports item from saved item files. The contents from PLC, program is inserted into project.
Variable/comment, basic parameter, I/O parameter, etc. is overwritten on the previous item.
Notes
- Since Variable/Comment, Basic Parameters and I/O Parameters are overwritten on the existing items,
the content of the existing item will be erased.
1) PLC
[Steps]
1. On the project window, select the Project Item.
2. Select [Project]-[Import Item from File]-[PLC] on the menu.
3. Select the file, and then click [OK].