LS Industrial Systems XG5000 - 6.3 View Program

Chapter 6 SFC Edit
6-30
6.3 View Program
Here describes how to zoom in or out
6.3.1 Program zoom In/Out
Here describes how to zoom in or out.
1) Zoom In
[Steps]
1. Select [View]-[Zoom In] on the menu.
2) Zoom Out
[Steps]
1. Select [View]-[Zoom Out] on the menu.
Notes
- Ctrl + Upward Wheel if available perform Zoom-Out step by step.
- Ctrl + Downward Wheel if available perform Zoom-In step by step.
- On the View Tool selection box, the user can select or directly input the magnification. Refer to 2.2 Tool
Box in Chapter 2 Basic Application for more details.