Chapter 5 LD Edit
5-38
5.3.3 View Device
It is used to display only the name of the device for the variable or device used as the contact point, coil and
function(block). If there is no device, it displays a name of variable.
[Steps]
1. Select [View]-[Devices].
5.3.4 View Variable
It is used to display the name of the variable for the variable or device used as the contact point, coil and
function(block).
If no variable is declared for the device, it will be displayed as the device name.
[Steps]
1. Select [View]-[Variable].
5.3.5 View Device/Variable
It is used to display the name of the device/variable for the variable or device used in the contact point, coil
and function(block).
If there is no device in the variable, the variable name only will be displayed.
[Steps]
To Next Page
Loading...
