Chapter 10 Online
10-4
10.1.2 Remote 1 Connect Setting
1) Ethernet Connect Setting
[Steps]
1. Select the Connection Type of Ethernet.
2.Click the setting button to specify Ethernet IP.
3. Click [OK] to save the Connect Options.
[Dialog Box]
Notes
- Ethernet shall be connected with PC to connect to Ethernet.
- IP is as specified in Ethernet communication module.
- Use Ping in [Execute] on Windows start menu previously to ensure normal connection is allowed with the
specified IP.
2) Modem Connect
1. Select the Connection Type of Modem.
2. Click the setting button to specify modem details.
To Next Page
Loading...
