Chapter 3 Project
3-31
3.4.5 Change program sequence
Scan and Task program will be executed from the upper in regular sequence.
Thus, the program location shall be changed to change the execution sequence.
1) Order Change with the menu
[Steps]
1. Move the cursor onto the program to change the order of execution.
2. Click the right mouse button to select [Move Up (Program)] or [Move Down (Program)] on the menu.
2) Order Change with Drag and Drop
[Steps]
1. Move the cursor onto the program to change the order of execution.
2. Click the left mouse button to drag to the location desired.
3. Drop on the desired location.
To Next Page
Loading...
