Chapter 4 Variable
4-48
[Comment of Dialog Box]
a. Number: used to display the duplicated number of the variables and direct variables to paste.
b. Replace: used to apply Paste.
c. Gray Line: used to display the data in the existing cell, which will not be edited.
d. White Line: If the variable or device of the data to paste is duplicated, it will be automatically increased
and then displayed on the screen. In addition, the cell can be edited.
e. Select All: used to check all the check boxes in the [Replace] column.
f. Unselect All: used to cancel all the selected check boxes in the [Replace] column.
Notes
-If all items are identical, the cell can not be edited, while if partially identical, the cell can be edited.
- If the number of the columns saved in the clipboard is greater than the number of the columns to paste, it
is not possible to paste.
- If the data saved in the clipboard is greater than the number of the lines to paste, it is not possible to paste.
4.6.3 Insert line
It is used to insert new lines as many as the lines of the selected area, which will make the existing lines
move downward.
[Steps]
1.Select the area to insert the lines into.
2. Select [Edit] - [Insert Line] on the menu.
.
To Next Page
Loading...
Need help?
General
