LS Industrial Systems XG5000 - 19.4 I;O Parameter Setting

Chapter 19 Exclusive Functions for Event Input Module
19-11
19.4 I/O Parameter Setting
I/O parameters of the XGF-SOEA can be set up using the menu or toolbar of the XG5000.
19.4.1 Setting Item
Sets up the method of saving the external event history in the XGF-SOEA module.
[Sequence]
1) Click on the [Parameter]-[I/O Parameter] in the project tree.
2) In the ‘I/O Parameter Setting’ window, click on the slot of the base where the module is mounted.
In the example below, the XGF-SOEA module is at #4 slot, #0 base.