Chapter 11 Monitoring
11-10
11.3 Variable Monitoring
Monitoring is available through specific variable or device registered.
[Variable Monitoring Window]
[Description of Variable Monitoring Window]
a. PLC: used to show available PLC names to register. XG5000 can be composed of multi-PLC.
Accordingly, it can be identified on the variable monitoring window.
b. Program: used to select a program name with a variable to register.
c. Variable/Device: used to input the name of a variable or device.
d. Value: used to display applicable device value when monitored. The value can be changed through
Change Current Value of monitoring.
e. Type: displays the type of a variable.
f. Device/Variable: press Enter or double-click an assigned address or variable name to select a
variable on the list of local variable if memory is allocated.
g. Comment: displays the variable comment.
h. Error Display: Error will be displayed in red.
i. Error type
- In case one of PLC name, device and Type is not input
- In case of incorrect device address
- In case there is no program name or there is no program in the PLC
- In case the device type is not supported or PLC name unavailable
a
d
b
f
c
e g
h
To Next Page
Loading...
