LS Industrial Systems XG5000 - Data Value Setting

Chapter 11 Monitoring
11-58
3) Open Respective Device Area if all windows closed
[Steps]
1. Select [File]-[Import Device from File] on the menu.
2. Select the device to open from the combo box.
Notes
a. If in monitoring mode, Open and Open Device from File are inactive.
11.5.7 Data Value Setting
Data value of the device can be specified according to its display type and the number of bits. In addition,
setting area of the data value can be selected.
[Steps]
1. Select [Edit]-[Fill Data Area] on the menu.