LS Industrial Systems XG5000 - Graph Function; File Function

Chapter 11 Monitoring
11-100
[Steps]
1. Select [Animation]-[Animation Pause/Resume] on the menu.
5) Stop
It is used to stop Animation.
[Steps]
1. Select [Animation]-[Stop Animation] on the menu.
11.8.6 Graph Function
Refer to 11.7.5 Graph Function in this manual for its basic functions.
1) Move Trigger
It moves the trigger to its generated point of time.
[Steps]
1. Select [Graph]-[Go to Trigger Position] on the menu.
11.8.7 File function
It is used to save or read trace setting from the file.
1) Open
[Steps]
1. Select [File]-[Open] on the menu.
2. Select a file name to open on File dialog box and then click [OK].
2) Save
[Steps]
1. Select [File]-[Save] on the menu.
2. Input a file name to save with on File Save Box and then click [OK].
3) Save as
[Steps]