LS Industrial Systems XG5000 - GMWIN Project Conversion Rules

Chapter 3 Project
3-10
3. Click Open to display the New Project Dialog Box.
4. Enter project name and PLC type and click [OK]. Then, it converts GMWIN file and creates XG5000
project.
3.3.2 GMWIN Project Conversion Rules
It converts a program created by GMWIN. The items converted to XG5000 are contact (type), coil (type),
horizontal line, vertical line, rung comment, function/function block, extended functions such as JMP and
SCAL.
a. Basic conversion
Items like contact (type), coil (type), horizontal line and vertical line are converted alike in GMWIN and
displayed accordingly. However, the variables used in contact and coil may be converted to other types
under the XG5000 display specifications and displayed accordingly. For the details of GMWIN variable
conversion, refer to 2) Converted Items of Variable Name.
b. Conversion of Extended Function
Other functions but the basic items such as label, jump and etc are converted to extended function. The
changed extended functions are as follows.