LS Industrial Systems XG5000 User Manual

Chapter 7 Programming Convenience
7-14
Notes
- Set coil (-(S)-) and Reset coil (-(R)-) are not the object to check for the Duplicated Coil.
- In the Function(block) output check, the range is determined by the parameter type.
7.3.2 Check Result Trace
If any error occurs on the program, its details will be displayed on the Program Inspect tap of the message
window. Double-click the error details to move to the location where the error occurs.

LS Industrial Systems XG5000 Specifications

General

Brand	LS Industrial Systems
Model	XG5000
Category	Controller
Language	English