Chapter 11 Monitoring
11-23
2. Display type of the device of the selected row will be changed.
Notes
a. BOOL type if viewed in unsigned decimal will be displayed “On/Off”.
b. Hexadecimal is displayed with small letter ‘16#’ as shown in “16#h10AC”.
c. String is displayed in “”as shown in “adcd”.
d. Separately applicable from the monitoring option.
e. Display menus will be active or inactive based on available display type.
11.3.3 Operation of Monitoring
1) Start Monitoring
It is used to start the monitoring of the device registered on the variable monitoring.
[Steps]
1. Select [Monitor]-[Start/Stop Monitoring] on the menu.
2. The item with identical Start Monitoring PLC name and the item with no error will execute Monitoring.
Variable Monitoring Window being monitored
Notes
a. PLC’s device value will not be displayed if not monitored.
b. Any item with error will not be monitored.
c. Edit, Add and Delete are available even during monitoring.
2) Change Current Value
Current value of the device can be changed in monitoring mode.
To Next Page
Loading...
